Climatic Thermal Shock Constant Humidity Cooling Test Chamber
Environmental Chamber
Uses:
Thermal Shock Test Chamber is applicable to high&low
temperature impacting test for electronic components and materials.
The thermal shock chamber is the perfect testing machine of
electronic components, metal, chemical materials, automation
components, communication module, national defense industry,
aerospace industry, BGA, PCB substrate, electronic chip IC,
semiconductor ceramic and high polymer materials.
Characters:
1. The most advanced new and Euramerican explosion-proof handle,
perfect modelling design, high texture appearance.
2. Use large human-computer touch conversational LED man-machine
interface controller, simple operation, easy to learn, it is stable
and reliable.
3. The way of shock is changing the wind grid to pull the cold and
hot temperature into testing area to enforce test.
4. Shocking time:0.1~999.9h; cycle period:1~9999times, settable.
5. Cycle and defrost ing count can be set, so does automatic
defrosting or manul defrosting.
6. It shows the the status and curve when working together with
explaination and eliminateing method when stoppage.
7. Euramerican imported efficient repeated compressing freezing
unit, low noise, energy saving.
8. Use PID automatic calculating control, high precision of
temperature control.
9. Can make automatic cycle shock or manual selective shock and can
choose two groove or three groove cold , heat shock.
10. Can use as a high temperature boc or low temperatue box
independently.
11. Use environmental refrigerants R404,R23 whitch cause no
poluution to the ozone.
Brief Introduction
High Efficiently Thermal Shock Chamber Cold Hot Impact Test
/machines and equipments is also known as hot and cold impact
testing machine used to test or composite material structure, in an
instant by the extremely high temperature and low temperature under
continuous environment can endure degree, in order to test in the
shortest possible time chemical changes caused by heat bilges cold
shrink or physical damage. Applicable to metal and plastic, rubber,
electronic...Such as material, can be used as the basis of its
product improvements or reference.
Features
1. The thermal shock tester is divided into three sections: the
high temperature chamber, the low temperature chamber and the
testing chamber.
2. The color touch panel control system was made in Japan can
display Chinese/English. The big size liquid-crystal LCD has been
adopted.
3. High temperature shock or low temperature impact, the maximum
time up to 999H, the maximum cycle up to 9999 times.
4. All equipment is fully automatic, and all process are precisely
controlled with P.L.C.’S.
5. Of any part of the malfunctions, the machine will automatically
shuts down and a warning light switches on.
6. Machine can be shut down automatically in case of electrical
power instabilities.
7. Can test the impact of RT,perform to meet the standards and test
method: GJB150.5;GJB360.7;GB/2423.22
Specifications:
| Test chamber size | 46×46×46cm | 56×66×56cm | 68×68×65cm | 80×80×76cm
|
| Shelves size | 36×36cm | 46×56cm | 60×60cm | 70×70cm |
| Temperature range | High temperature zone:normal~+150°C |
Low temperature zone:normal~-60°C
|
| Hoting&cooling speed | 1.5°C per minute average |
| Temperature fluctuation | less than ±0.5°C |
| Temperature deviation | less than ±2°C |
| Temperature conversion time | less than 10s
|
| Temperature recovery time | less than 5min |
| Impact method | cylinder conversion
|
| Materials | external materials:SUS#304 stainless steel
|
| Internal materials: SUS#304 stainless steel |
| Cooling system | water-cooled or air-cooled, Taikang compressor in Franch,
environment friendly refrigerant
|
| Controller | programmable temperature controller in Japan |
| Standard accessories | view windos, cable hole, lighting devices |
| Design standard | GB/GJB/IEC/MIL |
| Power | 7.5KW 12KW 26KW 15KW AC380V/50Kz, three phase |
| Remarks | It can customize by customer demands. Technology index refer to
product description.
|
KeJian Instrument Service:
If you face any problems in future during testing process we
promise we will give you a reply within 48 hours and solution
provide within 3 working days. We can offer operation video and
English operation muanual. We can provide video-con.
Onsite Service:
1.Device installation 2.Equipment Operation Test Technology
training 3. Equipment Calibration 4.Daily maintenance and
maintenance of equipment
Free technical training for visiting factories 24-hour Online
contact
Free software upgrades
Free information:
1.Product Instruction;2.Product operation
instruction/video;3.Experiment Test (test application, test report)
Device Problem Handling:
1. Social media 24 hours online communication;2. Mail Seamless
Docking;3. Video Conferencing;4. Artificial free door-to-door
service
FAQ:
1. Why Choose Us?
(1)Focusing on this testing field for over 15 years makes us
professional.
(2)Located in Dongguan city--the world class manufacturing city.
(3)After-sales service for 12 months, promptly deal with all the
problems.
2. Are you a factory?
Yes, we are.
3. What's the product delivery time?
Within 10 work days after deposit received.
If we have stock, the delivery time will be greatly shortened.
4. What's your terms of trade?
We accept EXW, FOB, CIF, CNF and so on.
