Laboratory Environment Climatic Aging Testing Machine Xenon Lamp
Weather Resistance Test Chamber
Chamber Inner Size and Structure:
| Inner size(cm):D×W×H | 50×60×50 |
| Power | 6.5KW |
| Temperature range | Temperature range |
| Humidity range | 65～98％R.H(adjustable) |
| Rain falling time | 0～9999min (adjustable) |
| Rain falling period | 1～240minutes,interval(break),adjustable |
| Spectral wavelength | 290nm～800nm |
| Xenon lamp total power | 1.8KW(lifetime:1600hours) |
| Time Controller | Imported programmable time computer integrated controller |
| Accuracy range | temperature ±0.1℃,humidity±1％R.H,indicate
accuracy:temperature,±0.1℃,humidity,±1％R.H |
| Temperature Humidity Sensor | PTR Platinum Resistance,PT100Ω/MV |
| Heating system | autonomous system,nichrome electric heating heater |
| Humidification System | isolated type,SUS steel surface evaporative humidifier. |
| Blackboard temperature | thermometal blackboard thermometal. |
| Temperature controller | Imported microcomputer temperature humidity integration controller |
| cyclic system | low noise,air-condition type motor, multiple-pin Centrifugal rotor. |
| Outside chamber material | SUS304 stainless steel. |
| Inner chamber material | SUS304 stainless steel plate |
| Sample shelf material | SUS304 stainless steel plate |
| Doorframe heat insulation | good heat and cold resistance,aging Silicone rubber door and
sealing strips. |
| Standard configuration | non-browning glass observing window 1pcs,xenon lamp 1pcs |
| Safeguard protection | leakage,short circuit,over temperature,short of water,motor
overheating,over-current protection,Backup data for power fail |
| Voltage power | AC380V±10％ 50±0.5Hz 3 phase 5 lines |
| Using temperature | 5℃～＋30℃≤85％R.H |
| Testing standards | GB/T2423.24-1995 GB/T16422.2 GB9344 GB/T1865-97 ASTM G 155-04a |
Chamber structure:
1.Outside bile uses high quality (t=1mm)SUS304 steel plate
numerically-controlled machine tool to process,outside hull spray
molding treatment,make chamber more bright and clean.
2.high density glass cellucotton,insulation thickness is 80mm.
3.Use long axis fan motor,heat and cold resistance,stainless steel
siroco fan,to make sure strength convection and vertical diffusion
cycle.
4.Between door and chamber,use double-deck thermostability sealing
strips,to make sure testing area is airtight.
5.Use no-retroaction doorknob,easy operation.
6.In the bottom of chamber,use high quality stationary type PU
running wheel.
7.Observing window uses multilayer hollow toughened glass.
Cooling system:
1.Compressor uses France TAIKANG whole sealing compressor.
2.Cooling system uses Unit or binary low temperature return circuit
system.
3.US “AIGLE” drying and filtering device,Taiwan AIRMENDER oil
separator,Italy Castel solenoid valve.
Product function:
Full spectrum xenon lamp
Various selective filtration system.
Water spray function.
Relative humidity controlling.
Testing chamber air temperature controlling system.
Irregular shape sample supporting structure.
Superior Xenon arc lamp.
Xenon lamp lifelong is decided by the illumination level of
radiation intensity,the lifelong is about 1600 hours,it's easy to
change the lamp.
