Uses:
Suitable for plastic film or sheet at a given level of impact of
free falling dart, 50% sample impact breakage when the
determination of mass and energy.
Used for plastic film or sheet thickness less than 1 mm at a given
level of impact of free falling dart, determination of the impact
of the 50% plastic film or the wafer sample broken mass and energy.
Standards:
GB/T 9639.1-2008,ISO 7765-1-1988, ASTM D1709,JIS K7124-1
Characteristic:
Windows visualization of menu interface, touch screen operation,
easy setting parameters quickly
Provide A, B two test patterns, and automatic judgment test state
Falling dart by electromagnetic absorption principle, can be
automatically released and effectively avoid the system error
caused by human factors
Sample pneumatic clamping, hand and foot dual boot mode, the unique
design of the built-in illuminator convenient user rapidly and
accurately for test operation
Professional computer software support test results for a variety
of graphic display unit display, test process, output and printing
function, clearly showed the test results to the users visually
The micro printer and a standard RS232 interface, convenient
external connection and data transmission system with computer
testing principle:
Trial begins, the first choice experiment method, the initial
quality and delta m value, a experiment.If the first sample
damaged, with Jordan farmar delta m reduce fall quality;If the
first sample is not broken, quality must be used farmar delta m
increase fall in this experiment.In short, the use of leverage to
reduce or increase the quality of fall, depending on the previous
sample was damaged.20 after sample test, calculate damage total N,
if N is equal to 10, the test is complete;If N is less than 10,
supplementary sample after continue to test know N equals 10;If N
is greater than 10, adding sample after continue to test until no
damage equal to the total number of 10, finally calculated by the
system automatically impact results.
Specifications:
| Test method | A,B ,choosable. |
| Test Range | Method A:50～2000g Method B:300～2000g |
| Test accuracy | 0.1 g(0.1J) |
| Sample clamping | Pneumatic |
| Bleed pressure | 0.6 MPa(Air supply users should bring along their own) |
| Air source connector | 8 mm Polyurethane |
| Sample clamping | > 150 mm × 150 mm |
| Power | AC 220V 50Hz |
| Weight | 70 Kg |
| External Size | Method A:500 mm(L) × 450mm(W) × 1320mm(H) Method B:500 mm(L) × 450mm(W) × 2160mm(H) |
RFQ:
Why choose us?
1. Considerate Service Different countries plugs, manually change
the-voltage from 110V to 220V, insurance indicator.
2. Excellent after sale service:
1 YEAR warranty. If you have any problems during testing process,
we promise we will give you a reply with 24 hours and solution
provide within 3 working days. What you need to do is to send us
the controller.
3. Good Packaging:
Covered with air bubble film before put the machine into the wooden
case, which not only has good shock absorption, impact resistance,
heat sealing and also has the advantages of nontoxic, odorless,
moisture corrosion, good transparency etc.
Pictures:
