Computer high and low temperature tensile testing machine
Applications:
Uses
This machine combines high-low temperature tester with tensile peel
strength tester wonderfully. It can restrain the error brought by
changing environment between testing process.Setting up different
fixtures can test 180&90 degree peeling strength, separating
force,ect. for the adhesive material in the high-low temperature
environment. This machine can be changed into programmable
temperature&humidity tester according to your needs.
This machine is applicable to metal, cementing compound, tubes,
sectional bars, aerospace, petrochemical, waterproof rolls, wire
and cable, textile, fiber, rubber, ceramics, food, mechanical
packaging, geo-textile, film, wood, paper and other industries and
quality supervision department, and it also can be used in college
for teaching demonstration.
Adopting precise auto control and data acquisition system to
realize fully digital adjustment to data acquisition and control
process. During tensile test, it can test max. bearing tensile,
compression, tensile strength, deformation, elongation and other
technical specifications;
After tensile test, the above parameters can be calculated
automatically through main controller according to the test
parameters, which are set before test and meantime display the
corresponding test results. All test parameters can be saved and
inquired after test, also can be connected with printer to print
test reports.
Features
- Lower noise: ≤60dB
- AC Servo motor, ensure good performance for long term
- PID control, constant loading and unloading and hold on loading,
constant-speed displacement and hold on displacement,
constant-speed deformation and hold on deformation
- High precision load cell
Technical Parameters——High-Low Temperature/Humidity tensile Tester
| Capacity: | 10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN,20KN( can
select double capacities reparation) |
| Temp. Range: | -40℃~150℃ (can require to make a higher temperature) |
| Display: | Computer display mode |
| Force Resolution: | 1/250,000 |
| Force Accuracy: | ≤±0.5% |
| Stroke Resolution: | 0.005mm |
| Control Mode: | All computerized operation mode |
| Temp. Control: | PID automatic calculation, stable error |
| Circulation System: | Fan force circulation system |
| Heating System: | SUS304 stainless steel heat radiation type of heater |
| Protection Device: | Leakage and overload protector |
| Test Stroke: | 150~200mm |
| Chamber Dimension: | 30×30×60cm(L×W×H) |
| Test Speed: | 0.5~500mm/min, set by computer, with up & down fast adjustment
button of grips |
| Force Unit Switch: | Kgf, N, Ibf, g, ton, Mpa |
| Stop Mode: | Overload stop, emergency stop button, specimen damage automatic
stop, upper & lower limit set automatic stop, automatic reset function |
| Machine Drive: | Servo motor drive, synchronous wheel and precision ball screw drive |
| Power: | 2KW |
| Machine Weight: | Approx 220kg |
| Power Supply: | 220V 50/60HZ 30A |
Character:
1. The machine structure using high-grade paint built-in
high-precision, low resistance, no gap double ball screw and guide
column, improve the load efficiency and structural rigidity.
2. The control system using Panasonic AC servo motor to ensure high
efficiency rotary system, smooth transmission, low noise, high
speed control accuracy.
3. The computer system using a commercial computer as the main
control machine, with the company's special test software, to
complete all the test parameters set, working state control, data
acquisition and processing analysis, the results show and print
output.
4. High and low temperature test chamber with double insulated
glass door, user-friendly observation of the test situation, and
the use of all stainless steel frame and liner, not only beautiful,
and strong corrosion resistance.
5. The instrument structure is reasonable, can be separated or
combined test, can be split into constant temperature and humidity
testing machine and stripping test machine use;
