Korea TEMI880 High-low Temperature and Humidity Tensile Testing
Chamber With Fan Force Circulation System
Equipment summary——High-Low Temperature/Humidity tensile Tester
- Electronic Power and Tensile Testing Machine Usage low Temperature
test machine is a new material testing machine that combined with
the electronic technology and mechanical transmission.
- It has accurate load speed, range of force measurement, Has high
accuracy and sensitivity for the load, displacement measurement and
control, it also can be tested the constant-velocity loading,
constant- velocity displacement.
- This machine is simple to operate, especially suitable for
controlling quality in production line This series of machine is
mainly applied to test the non-metallic and metallic materials
which the load is 20T.
Technical Parameters——High-Low Temperature/Humidity tensile Tester
| Capacity: | 10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN,20KN( can
select double capacities reparation) |
| Temp. Range: | -40℃~150℃ (can require to make a higher temperature) |
| Display: | Computer display mode |
| Force Resolution: | 1/250,000 |
| Force Accuracy: | ≤±0.5% |
| Stroke Resolution: | 0.005mm |
| Control Mode: | All computerized operation mode |
| Temp. Control: | PID automatic calculation, stable error |
| Circulation System: | Fan force circulation system |
| Heating System: | SUS304 stainless steel heat radiation type of heater |
| Protection Device: | Leakage and overload protector |
| Test Stroke: | 150~200mm |
| Chamber Dimension: | 30×30×60cm(L×W×H) |
| Test Speed: | 0.5~500mm/min, set by computer, with up & down fast adjustment
button of grips |
| Force Unit Switch: | Kgf, N, Ibf, g, ton, Mpa |
| Stop Mode: | Overload stop, emergency stop button, specimen damage automatic
stop, upper & lower limit set automatic stop, automatic reset function |
| Machine Drive: | Servo motor drive, synchronous wheel and precision ball screw drive |
| Power: | 2KW |
| Machine Weight: | Approx 220kg |
| Power Supply: | 220V 50/60HZ 30A |
Character:
1. The machine structure using high-grade paint built-in
high-precision, low resistance, no gap double ball screw and guide
column, improve the load efficiency and structural rigidity.
2. The control system using Panasonic AC servo motor to ensure high
efficiency rotary system, smooth transmission, low noise, high
speed control accuracy.
3. The computer system using a commercial computer as the main
control machine, with the company's special test software, to
complete all the test parameters set, working state control, data
acquisition and processing analysis, the results show and print
output.
4. High and low temperature test chamber with double insulated
glass door, user-friendly observation of the test situation, and
the use of all stainless steel frame and liner, not only beautiful,
and strong corrosion resistance.
5. The instrument structure is reasonable, can be separated or
combined test, can be split into constant temperature and humidity
testing machine and stripping test machine use;
Main Parameters:
| Technical parameters of tensile testing machine |
| Capacity | 5,10,50,100,200,500,1000,2000,5000kg |
| Load Resolution | 1/25000 |
| Accuracy | ≤0.5% |
| Test speed | 0.001~500mm/min |
| Power system | Panasonic AC servo motor + drive |
| Software Features | The units select g, kg, N, KN, LB |
| Technical parameters of high and low temperature control system |
| Model | High and low temperature |
| Temperature control range | customized according to customer requirements |
| Humidity range | 20%RH~98%RH |
| Control stability | ±2.5%RH,±1℃ |
| Distribution | ±3%RH,±1℃ |
| Temperature&humidity control | Korea TEMI880 |
| Inner dimension | 40*40*70cm |
| Power | 1∮,AC220V/50HZ |
