Water spray testing machine is applied to test the products performance of water resistance. Our
machine meets with standards of IEC60529 and JISD0203. Different type related environmental test
equipment is available for us, such as dust test chamber, salt
spray test chamber. Welcome to inquiry any different requirements.
Technical Parameters:
| Model | YSRT-1728-A | YSRT-1728-E |
Inner chamber size W×H×D(cm) | 120× 120× 120 | 120× 120× 120 |
Exterior chamber size W×H×D(cm) | 170×195×137 | 170×195×137 |
| Water temperature | Normal atmospheric temperature | Normal atmospheric temperature |
| Type of spray test | Total flow rate (L/min) | R1 | 1.8 | IP×1 | 1~1.5mm/min |
| R2 | 3.2 | IP×2 | 1~3.5mm/min |
| S1 | 24.5 | IP×3 | angel±600;R:400;1.1L/min |
| S2 | 39.2 | IP×4 | angel±1800;R:400;1.8L/min |
Spray nozzle pressure (kgf/ cm2) | R1 | 0.1 | 1.Water flow rate of each hole is 0.07L/min. 2.IP×3,radius 400mm,total 16 holes,water flow rate is 1.1L/min. 3.IP×4,radius 400mm,total 25 holes, water flow rate is 1.8L/min. |
| R2 | 0.3 |
| S1 | 1 |
| S2 | 3 |
Rotating speed of testing platform | 17RPM | 1RPM |
Rotating speed of spray nozzle | 23RPM | 1.Spraying tube is driven to move for 30℃ on each side along the vertical,4seconds per round-trip. 2.Spraying tube is driven to move for180℃ on each side along the vertical,12seconds per round-trip. |
|
|
|
| Material | Inner chamber | SUS#304 |
| External chamber |
| Other components | Chamber lamp,rain wiper,caster |
| Power supply | AC 3phase 380V 60/50Hz |
| Customization service | Non-standard or special requirements are all welcome |
Detailed Images
Advantages:
1. Superb quality with reasonable price
2. Prompt delivery
3. Aperture water:0.4mm
4. Manufacturer and factory
Main Features:
1. Spray tower attached cone diffuser, with functions of
directional mist, adjustable mist, and uniformity fog lamp.
2. High sensitivity, can detect any accident and start alarm in the
shortest time to ensure operator and chamber safety.
3. Apply PID + PWM control method, precisely control water flow.
4. The machine can make the test content from Rt ~ 85 °C heat,
temperature under test than water temperature high produce a
negative pressure.
Water flow rate
IPX1: 1+0.5mm/min
IPX2: 3+0.5mm/min
Distance between two needles: 20mm
1. Tube radius: 600mm (400,800,1000mm)
2. Number of open holes: 25 pcs (IPX3), 37 pcs (IPX4 )
3. Total water flow rate: 1.8L (IPX3), 2.6 (IPX4)
4. Hole diameter: 0.4mm
JISD0203 S1 S2 R1 R2 Water test
Water pressure (MPa) Number of nozzles Water flow rate(L)
R1 0.01 2 1.9
R2 0.03 2 3.2
S1 0.1 40 24.5
S2 0.3 40 39.2
IPX5 IPX6 Water test
1) distance: 2.5~3m
2) water flow rate: 12.5L/min±5% (IPX5), 100L/min±5% (IPX6)
IPX7 IPX8 Imersion water test
1) IPX7: 0.15m above top, 1m above bottom
2) IPX8: by agreement
