Electronic AC 220V 50Hz 1KW Digital Rain Water Resistance IP Rating Waterproofing Spray Tester
Equipment
1. Uses of rain box tester
This product is suitable for electric products assessment, shell
and seal in the rain environment can ensure that equipment and
components good performance test. This product uses scientific
design, makes the equipment can realistic simulation drop of water,
water spray, splash water, water spray, etc., various kinds of
environment. Into the comprehensive control system and the adoption
of the frequency conversion technology, which makes the rainfall
test product frame rotation Angle, jet pendulum rod swing Angle of
water quantity and the oscillating frequency can be automatic
control.
2. Based on the standard of rain box tester
IEC60529-2001, GB4208-2008, GB2423.23, GB5170.38, GBl0485-93, IPX4,
IPX3 equivalent JIS standard, DIN, MZl, etc
3. Features of rain box tester
(1) Glass door with wiper
(2) Pneumatic drive of swivel tube
(3) Adjustable swivel angle
(4) Replaceable swivel tubes
(5) Nozzle fittings can be swiveled and replaced
(6) Adjustable water volume flow and measuring Control of test
duration
(7) Control System
(8) Adjust pressure with flow meter.
(9) Adopts imported frequency converter to control rotate speed in
order to ensure the test can be conducted as per the applied
standards.
(10) A water filter is equipped.
4. Main technical parameters of rain box tester
| Model | KJ-2096 |
| Internal dimension W*H*D mm | 800 X 800 X800 |
| Exterior Dimensions W*H*D mm | 1160 X 1640 X960 |
| Observation window | Glass door |
| Test bench speed(rpm) | 1 ~5 adjustable |
| Turntable diameter | φ300MM |
| Turntable load | 20KG |
| Intermittent be caught in time | 15min/25min |
| speed | 5-10 s/rpm |
| Water ring radius | 375mm, pipe diameter16mm |
| Nozzle jet Angle | 45°90°135° fixed direction, water spraytowards rotary center |
| Each spray hole flow | 100±5 L/min(adjustable), flow display direct reading |
| Water spray pressure | 200-400, a pressure gauge direct reading |
| Test time | 1-999,999min(adjustable) |
| Material | Internal 304 stainless steel, exterior 201 stainless steel |
| Safety protection device | Power overload, short circuit protection, earthling protection,
water protection and alarm - ring tip |
| Power | AC 220V 50Hz |
| Total power | 1000W |
1.Meet the requirement of IEC60529 standard IPX3 water pouring test
and IPX4 water splash test. 2.The test sample will be put or installed on the center of the
half-round sinuous pipe and make the bottom of the test samples and
the oscillating axis in a horizontal position. During test, the
sample would spin around the center line. 3.Swing pipe standard configuration: R600mm and R1000mm two
types.Swing pipe inner diameter: Φ15mm. 4.DrillΦ0.4 holes and make the water spray to the center.The water
pressure of the device entrance is equal to 10m water level,
spraying water pressure is 80-100kpa. 5.Water spraying pipe swing angle: 120º,180º,360º, Vertical sides:
60º,90º,175º. Complete a swing(2*120º) time is 4S;Complete a swing(2*360º) time
is 12S. 6.Manual default the test parameters, complete testing
automatically shut off the water supply and pendulum pipe angle
automatic zeroing and automatic eliminate seeper, avoid scale
blockage needle tip. 7.Use Mitsubishi PLC, LCD panel test procedure control box,
stainless steel curved pipe, alloy aluminum frame, stainless steel
shell.
8.Servo drive mechanism, guarantee the pendulum pipe Angle of
precision, the overall pendulum tube structure for hang a wall.
9. Water is recyclable for the chamber type, it is suitable for the
small and light specimen; if you specimen is large and heavy, you
can consider our separate type.
10. Our water proof test machines can meet test standard of
IEC60529(IPX1,IPX2,IPX3,IPX4,IPX5,IPX6,IPX7,IPX8), JIS D0203 water
proof test and other equivalent test standard.
Pictures:
