USA Sensor Electrical Control Universal Testing Machines For Rubber
, Plastic , Nylon
1. Main functions:
Computer Universal Material Tensile Strength Testing Machine Price is applied to the flexible material in
tension, tear, adhesive strength, peel (90 degrees and 180 degrees) and others, such as rubber,
plastic,
plastic film and others. It is equipped with extensometer which
special used to measure the deformation of
specimen, it suitable to test the large deformation of material.
2. Corresponding standard: GB/T16491-1996 electronic universal testing machine
3.Applicable industry
Tensile Strength Testing Machine is widely used in wire and cable, hardware, electronic and
electrical equipment, packaging, printing, medical equipment, auto
parts, textiles and leather, clothing, shoes, rubber and plastic
products, colleges and universities; research laboratories;
inspection arbitration,
technical supervision departments and many other industries, it is
the basic equipment for quality
management and physical tested.
4. Technical parameters:
| Model | Computer Universal Material Tensile Strength Testing Machine |
| Max load | 500N,1KN,2KN, option |
| Accurate grade | 1grade /0.5 grade |
| Effective measuring range | 0.2%~100%(1grade)/0.4%~100%(0.5 grade) |
| Measuring accuracy | the value ±1% / the value±0.5% |
| Tester resolution | Max load 1/200000, constant the resolution |
| Load sensor | Basic configuration:sensor(max load): one;
Extended configuration:can add more sensors |
| Effective testing width | 300mm(can be widened according to customer’s requirement) |
| Effective tensile stroke | 800mm;1000mm;1200mm (can be increased the height according to customer’s requirement) |
| Range of testing speed | 0.001~500mm/min |
| Accuracy of displacement measurement | Tolerance: ±0.5%/ tolerance: ±0.2% |
| Deformation of measured system(according to the requirements ) | Min span :10mm, Max range of deformation :800mm;
Extended deformation :Min span: 25mm,50mm,100mm, range of deformation :5mm,10mm,25mm |
| Accuracy of measured deformation | Tolerance :±0.5% (according to requirement ofcustomer to choose the larger or small deformation) |
| safety | Electronic-limit protection |
| Testing platform moving device | Fast /slow two speeds to control,can jog |
| Return back | Manual or automatic operation,After the test, the moving iron
return to initial position with the highest speed by manual or
automatic operation |
| Overload protection | Overload 10%,automatic protection |
| fixture | A set of tensile fixture |
| Machine size | 65x36x210cm(length*width*height)(including the height of operative
table) |
| Power system | Panasonic AC Servo Motor + Driver + high-precision ball screw |
| Power supply | 220V,50HZ |
| Power | 0.2KW(depending on different demand of force, using different
motor) |
| Machine weight | (about)160 KG |
| Units | KG, N, LB, TON, can be exchanged
|
Tensile Strength Test Machine software operation interface
